Programming the automatic cleaning end time
GB
1. Press the | button until the | icon and the two |
digits on the DISPLAY begin to flash. |
| |
2.Turn the TIMER KNOB towards “ ” and “ ” to adjust the hour value.
3. Press the button again until the other two digits on
the DISPLAY begin to flash.
4.Turn the TIMER KNOB towards “ ” and “ ” to adjust the minute value.
5.Press the button again to confirm.
6.When the set time has elapsed, the text END appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO)
FAST CLEAN level has been selected, with the default duration of 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
Programming has been set when the and buttons are illuminated. The display shows the FAST CLEAN end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven has cooled down sufficiently before you can open the oven door. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.
Troubleshooting
Problem | Possible cause |
| Solution | ||
|
|
| The appliance has just been |
| Set the clock. |
|
|
| |||
|
|
| |||
|
|
| connected to the electricity |
|
|
|
|
|
| ||
|
|
| mains or there has been a blackou |
|
|
A programmed cooking mode | There has been a blackout. |
| Reprogram the cooking mode. | ||
does not start. |
|
|
| ||
Only the high luminosity | The appliance is in standby mode |
| Press any button to exit | ||
“Clock button” is lit. |
|
| standby mode. | ||
Positions 1 and 5: the direct |
| We recommend switching | |||
selected and the food looks burnt. | heat could cause |
| dripping pan positions halfway | ||
|
|
|
| through cooking. | |
|
|
| foods to burn. |
|
|
|
|
|
|
|
|
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
12
