Installation

Keep this instruction manual in a safe place for EN future reference. If the appliance is sold, given away

or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4.Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation that may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

Technical data

Dimensions

width 59.5 cm

height 82 cm

 

 

 

depth 57 cm

 

 

Capacity

12 standard place-settings

 

 

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

4.3 psi – 145 psi

 

 

Power supply

See appliance data plate

voltage

 

 

 

Total absorbed

See appliance data plate

power

 

 

 

Fuse

See appliance data plate

 

 

 

 

 

 

 

This dishwasher conforms to

 

 

 

the following European

 

 

 

Community Directives:

 

 

 

-2006/95/CE dated

 

 

 

16/01/2007 (Low Voltage) and

 

 

 

subsequent modifications

 

 

 

-89/336/EEC dated 03/05/89

 

 

 

(Electromagnetic

 

 

 

Compatibility)

 

 

 

and subsequent modifications

 

 

 

-97/17/EC (Labelling)

 

 

 

-2002/96/ CE (Waste

 

 

 

 

 

 

Electrical and Electronic

 

 

 

Equipment WEEE)

 

 

 

 

*Only available in selected models.

2

Page 2
Image 2
Hotpoint LFT04 manual Installation, Positioning and levelling, Advice regarding the first wash cycle

LFT04 specifications

The Hotpoint LFT04 is a versatile and efficient dishwasher that embodies modern technology and innovation, making it an essential addition to any kitchen. Designed with a focus on convenience, performance, and energy savings, the LFT04 caters to diverse dishwashing needs.

One of the standout features of the Hotpoint LFT04 is its spacious interior capacity. It can accommodate up to 13 place settings, allowing you to tackle larger loads effortlessly, perfect for families or those who entertain often. The adjustable upper basket adds flexibility, enabling users to customize the loading space to fit various dish sizes and shapes. This thoughtful design minimizes the need for pre-rinsing, saving both time and water.

The LFT04 employs several cutting-edge technologies to ensure optimal cleaning results. The Active Dry feature, for instance, enhances drying efficiency by using residual heat at the end of the wash cycle, resulting in sparkling clean dishes without the need for manual drying. Additionally, the Eco Wash program is designed for energy-conscious users, using less water and energy while still delivering high-quality cleaning performance.

Another notable characteristic of the Hotpoint LFT04 is its user-friendly control panel. With clearly labeled functions, users can easily select from multiple wash programs, including Intensive, Normal, and Rapid cycles. The intuitive design allows for quick adjustments and makes it accessible for everyone, regardless of their technical expertise.

Noise reduction technology is also a prominent feature of the LFT04. Operating at a quiet 47 decibels, this dishwasher ensures that you can have conversations or enjoy your home environment without the distraction of loud appliances. This is particularly beneficial during evening hours or in open plan living spaces.

In terms of build quality, the LFT04 features a sleek and modern design, complemented by a stainless-steel finish that not only looks great but is also durable and easy to maintain. Its robust construction ensures longevity, making it a reliable investment for your kitchen.

Overall, the Hotpoint LFT04 stands out as a highly efficient, functional, and stylish dishwasher. With its array of features, advanced technologies, and user-oriented design, it simplifies dishwashing duties, allowing you to spend more time enjoying the things you love.