The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

the socket is earthed and complies with current regulations;

the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

the power supply voltage falls within the values indicated on the data plate on the inside of the door;

the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance)

This appliance must be earthed.

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is

fitted.

EN

 

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow -

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH

‘E’ or

NEUTRAL

‘N’

LIVE

‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current- operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/ 240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

3

Page 3
Image 3
Hotpoint LFT04 manual Electrical Connection, Fitted

LFT04 specifications

The Hotpoint LFT04 is a versatile and efficient dishwasher that embodies modern technology and innovation, making it an essential addition to any kitchen. Designed with a focus on convenience, performance, and energy savings, the LFT04 caters to diverse dishwashing needs.

One of the standout features of the Hotpoint LFT04 is its spacious interior capacity. It can accommodate up to 13 place settings, allowing you to tackle larger loads effortlessly, perfect for families or those who entertain often. The adjustable upper basket adds flexibility, enabling users to customize the loading space to fit various dish sizes and shapes. This thoughtful design minimizes the need for pre-rinsing, saving both time and water.

The LFT04 employs several cutting-edge technologies to ensure optimal cleaning results. The Active Dry feature, for instance, enhances drying efficiency by using residual heat at the end of the wash cycle, resulting in sparkling clean dishes without the need for manual drying. Additionally, the Eco Wash program is designed for energy-conscious users, using less water and energy while still delivering high-quality cleaning performance.

Another notable characteristic of the Hotpoint LFT04 is its user-friendly control panel. With clearly labeled functions, users can easily select from multiple wash programs, including Intensive, Normal, and Rapid cycles. The intuitive design allows for quick adjustments and makes it accessible for everyone, regardless of their technical expertise.

Noise reduction technology is also a prominent feature of the LFT04. Operating at a quiet 47 decibels, this dishwasher ensures that you can have conversations or enjoy your home environment without the distraction of loud appliances. This is particularly beneficial during evening hours or in open plan living spaces.

In terms of build quality, the LFT04 features a sleek and modern design, complemented by a stainless-steel finish that not only looks great but is also durable and easy to maintain. Its robust construction ensures longevity, making it a reliable investment for your kitchen.

Overall, the Hotpoint LFT04 stands out as a highly efficient, functional, and stylish dishwasher. With its array of features, advanced technologies, and user-oriented design, it simplifies dishwashing duties, allowing you to spend more time enjoying the things you love.