The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

EN

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

•the socket is earthed and complies with current regulations;

•the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

•the power supply voltage falls within the values indicated on the data plate on the inside of the door;

•the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance)

This appliance must be earthed

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’ or

NEUTRAL ‘N’

LIVE ‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current-operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

3

Page 2 Page 4
Page 3
Image 3
Hotpoint Dishwasher Electrical Connection, Changing the Plug, This appliance must be earthed, Changing the Mains Lead
Page 2 Page 4

Dishwasher, LFT 2284 specifications

The Hotpoint LFT 2284 is an advanced, sleek dishwasher designed to enhance your kitchen experience with its efficiency and cutting-edge features. Built with the modern household in mind, this appliance stands out due to its user-friendly design, effective cleaning performance, and energy-saving technology.

One of the main features of the Hotpoint LFT 2284 is its impressive capacity. With multiple adjustable racks, this dishwasher can easily accommodate large loads, making it perfect for families and entertaining guests. The interior includes specialized compartments for cutlery and delicate items, ensuring that every piece comes out sparkling clean without damage.

The LFT 2284 is equipped with Hotpoint's innovative ActiveDry technology, which ensures thorough drying after the wash cycle. This feature utilizes natural airflow for better drying results, reducing the need for additional drying cycles, and saving energy. The dishwasher also offers an Eco Wash cycle, designed to save both energy and water, making it an environmentally friendly choice for conscious consumers.

In terms of cleaning performance, the Hotpoint LFT 2284 stands out with its multiple washing programs. From intensive cycles for heavily soiled pots and pans to quick wash options for lightly soiled dishes, this dishwasher adapts to various needs effortlessly. The adjustable wash arms ensure water reaches every corner, delivering excellent results across a variety of load types.

Noise levels are another consideration in today’s appliances, and the LFT 2284 operates at a remarkably quiet level, allowing users to run it at any time without disrupting the household. Its sleek design fits seamlessly into any kitchen aesthetic, with a simple control panel that is easy to navigate.

Reliability comes with the Hotpoint name, and the LFT 2284 is no exception. It features a durable build quality and thoughtful design that prioritizes user convenience and longevity. With a perfect balance of functionality and energy efficiency, the Hotpoint LFT 2284 is an exceptional choice for anyone seeking a reliable and effective dishwasher, making dishwashing a simple and hassle-free task. Whether it’s a regular family meal or a gathering of friends, this dishwasher is ready to handle it all with sophistication and style.
Top Page Image Contents