Start-up and use
The first time you use your appliance, heat the empty
GB | oven with its door closed at its maximum temperature |
| |
| for at least half an hour. Make sure that the room is |
| well ventilated before switching the oven off and |
| opening the oven door. The appliance may emit a |
| slightly unpleasant odour caused by protective |
| substances used during the manufacturing process |
| burning away. |
| Never put objects directly on the bottom of the oven; |
| this will prevent the enamel coating from being |
| damaged. |
| Always place cookware on the racks provided. |
| During use, we suggest removing any crockery or |
| delicate foodstuffs from the recesses not in function. |
| We suggest not opening the door when cooking |
| foodstuffs which require leavening, so as to not |
| compromise cooking results. |
| If the door is subject to repeated jerking, the divider |
| may come out of its housing. If this happens, the time |
| will appear on the display. Make sure that the divider |
| is correctly installed then |
| Cooling ventilation |
In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door.
Once cooking is completed, the cooling fan activates and deactivates automatically until the oven has cooled down sufficiently.
Setting the clock
This may only be set while the oven is switched off. 1. Press thebutton until the first numerical digit
flashes on the display and the , | and | icons |
are switched off. |
|
|
2.Turn the TIMER KNOB towards “+” and
3.Press thebutton again so that the other two numerical digits on the DISPLAY begin to flash.
4.Turn the TIMER KNOB towards “+” and
5.Press thebutton again to confirm.
Setting the timer
This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.
1. | Press the | button until the | icon and the three |
digits on the DISPLAY begin to flash. | |||
2. | Turn the TIMER KNOB towards | “+” and |
adjust the minute value.
3. Press thebutton again to confirm.
The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated.
ExtraLarge Space
Starting the oven
1. Select the desired cooking function by turning the
EXTRALARGE SPACE FUNCTION knob. If the icon on the display is lit, this indicates that the ExtraLarge Space has been selected and therefore that only the settings corresponding to the ExtraLarge Space may be used.
2.The oven will begin its preheating stage. The temperature may be changed by turning the
TEMPERATURE knob. The indicator light flashes during the
3.Once the
4.During cooking it is always possible to:
-Change the cooking function by turning the EXTRALARGE SPACE FUNCTION knob.
-Adjust the temperature using the TEMPERATURE knob (for the universal cooking functions only).
-Set a duration (for universal cooking functions only) and the cooking end time.
-Stop cooking by turning the EXTRALARGE SPACE FUNCTION knob to the “0” position.
5. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed.
When using the oven in its ExtraLarge configuration, it will not be possible to use the Main and Small Space features: the SMALL SPACE and MAIN SPACE FUNCTION knobs will be disabled.
Universal cooking functions
All functions have a default cooking temperature which may be adjusted manually to a value between 40°C and 250°C as desired.
For the BARBECUE function, the default power level value is indicated as a percentage (%) and may also be adjusted manually.
6