Automatic cleaning with the FAST GB CLEAN function
With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven due to the combustion process. There is no cause for concern: this process is both normal and hazard- free.
Before initiating the FAST CLEAN mode:
!We recommend the duration of the first automatic cleaning cycle is set to 120 minutes.
•Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents.
•Remove all accessories.
•Remove the DIVIDER.
•Do not place tea towels or pot holders over the oven handle.
!If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.
!The programme may only be started once the oven door has been closed.
To enable the FAST CLEAN cycle, turn the
EXTRALARGE SPACE FUNCTION knob to
.
Press the
button. The TIMER KNOB may be used to select the desired cleaning level; there are three default time settings which cannot be modified.
1.Economy (ECO): turn the knob towards
2.Normal (NOR): initial level. Duration 1 hour and 30 minutes.
3.Intensive (INT): turn the knob towards “+”. Duration 2 hours.
4.Press the
button to confirm.
An end time for the FAST CLEAN cycle (as for a normal cooking cycle) may be programmed (see Programming the automatic cleaning end time).
Safety devices
• The icon on the display, when lit, indicates that the oven door was automatically locked as soon as the temperature reached a high value.
•If a malfunction occurs, the heating elements will be switched off.
•Once the oven door has been locked, you cannot change the duration and cycle end time settings.
Programming the automatic cleaning end time
1. Press the
button until the icon and the two digits on the DISPLAY begin to flash.
2.Turn the TIMER KNOB towards “+” and
3.Press the
button again until the other two digits on the DISPLAY begin to flash.
4.Turn the TIMER KNOB towards “+” and
5.Press the
button again to confirm.
6.When the set time has elapsed, the text END appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level has been selected, with the default duration of 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
Programming has been set when the and
buttons are illuminated. The display shows the FAST CLEAN end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven has cooled down sufficiently before you can open the oven door. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.
16
