RB536DP– Hotpoint 30" Free-Standing Electric Range
Dimensions (in inches)
29-7/8
REAR
WALL
7
5
Amp Rating
240V | 12.6 |
|
|
208V | 9.9 |
|
|
Breaker Size
40 Amps†
46-1/8
1/4†
CENTER LINE
†The range may be placed with 0" clearance (flush) at the back wall and side walls if the range side trims extend beyond the cabinet fronts at least 1/4".
†Note: Check local codes for required breaker size.
Note: 30" Electric Ranges conform to U.L. requirements for
0" spacing from walls below countertops. Allow
Receptacle Locations: Locally approved flexible service cord
or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.
26-3/8*
*Dimension from wall to front of closed oven door. Dimension from wall to the front of closed oven door handle is
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
All Hotpoint ranges are equipped |
|
with an | Listed by |
installation of this device is an | |
important, required step in the | Underwriters |
installation of the range. | Laboratories |
420407