Hotpoint RFA52xx, NRFAA50 x Gb Door Reversal, Remove the doors, Replacing the doors

Models: NRFAA50 x

1 12
Download 12 pages 7.53 Kb
Page 4
Image 4
GB DOOR REVERSAL

GB DOOR REVERSAL

Warning: Before attempting to remove the doors, switch off the electrical supply and pull out the mains plug. It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated containers whilst carrying out this operation.

You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original packaging).

Remove the doors

1.Lay down the appliance on its back.

2.Unscrew, remove and retain the bottom hinge.

3.Slightly open the bottom door

and slide downward remove and carefully place to one side

4. Remove centre hinge and spacer if fitted. Slightly open the top door and slide downwards, remove and carefully place to one side.

5. The pin will be removed and fixed to the opposite side cover.

6. Use a thin blunt instrument to remove the top and bottom hinge bushes and blanking plugs from the doors, take care not to mark the door handle. Reposition the blanking plugs and bushes on the opposite side.

7.Fit the blanking plugs provided into the right hand two centre hinge holes.

8.Before changing hinge place from right side to left side, screw on left side panel should be disassemblied and after changing hinge place, screw should be assemblied on right side panel.

Replacing the doors

1.Slide the top door upwards and locate the top hinge pin into the door bush. Reposition the centre hinge on the opposite side.

2.Carefully slide bottom door upward

into the centre hinge pin.

3. Unscrew the bottom hinge pin and refit it on the opposite side..

4. Fit the bottom hinge making sure that the door is aligned to the cabinet.

5. Carefully stand the appliance upright in it’s required location and make sure it is sitting level on the floor. Open and close the doors checking that the gasket makes a good seal without any gaps when the doors are closed.

Note: Replace loose items/fittings back into the appliance and leave for at least 15 minutes before switching back on.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

4

Page 4
Image 4
Hotpoint RFA52xx, NRFAA50 x operating instructions Gb Door Reversal, Remove the doors, Replacing the doors