Hotpoint RVM1635 owner manual Light Bulb Replacement, Cooktop Light, Oven Light

Helpful Information

Light Bulb Replacement

Cooktop Light

Replace the burned-out bulb with a 120 volt,

40-watt incandescent bulb (WB36X10003), available from your GE supplier.

1To replace the bulb, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the screw from light cover and lower the cover.

3Be sure the bulb is cool before removing. After breaking the adhesive seal, remove the bulb by gently turning.

4Replace the bulb. Close the light cover and secure the cover with the screw. Connect electrical power to the oven.

Remove Screw

Oven Light

Replace the burned-out bulb with a 120 volt,

40-watt incandescent bulb (WB36X10003), available from your GE supplier.

1To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the front grille by backing out the 3 screws along the top. Slide the grille to the left, then pull

straight out.

32

3Remove the charcoal filter, if present. Reach into the opening, just right of center. The light bulb is located beneath a light compartment cover. Press and hold the center snap while lifting the tab on the left corner. Remove the

cover. Remove the bulb by turning gently.

4Install the replacement bulb. Reinstall the compartment cover and charcoal filter, if present, Reinstall the front grille panel with the 3 original screws.

Interior Light

Housing

5Connect electrical power to the oven.