Start-up and use
The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.
The “Control panel lock” and “DEMO mode” can be activated/deactivated even when the control panel is switched off.
If no button is pressed within 2 minutes of the oven being switched on, the appliance will be switched off automatically.
Control panel lock
To lock the oven controls, press the 
button, the “START/STOP” button and the time “+” button on the right hand side of the control panel in sequence. A buzzer sounds and the TEMPERATURE display shows “Loc”.
To unlock the oven controls, press the 
button and the time
The control panel lock function can be activated when a cooking programme is in progress or when the oven is switched off, or when a cooking end time has been set and the start button pressed. The control panel lock function can also be deactivated in all the above situations and after the oven has completed the set cooking programme.
Demo mode
The oven can operate in DEMO mode: all heating elements are deactivated, and controls remain operative. To activate the DEMO mode, while the oven is switched on press the ON/OFF button, the START/ STOP button and the time "+" button on the right hand side of the control panel, in that order.
To deactivate the DEMO mode, while the oven is switched on press the ON/OFF button and the time
Setting the clock
The clock may be set when the oven is switched off or when it is switched on, provided that a delayed cooking cycle has not been programmed previously.
1. Press the 
button several times until the 
icon and the two digits on the TIME display flash.
2. Press the “+” and | GB |
|
3. Press the 
button.
4.Press the “+” and
5.Press the 
button again to confirm.
Setting the timer
This may be set while the oven is switched off or while it is switched on.
1.Press the 
button several times until the 
icon and the three digits on the TIME display flash.
2.Press the “+” and
3. Press the 
button again to confirm.
Switching the oven on
Press the 
button to switch the oven on or off.
Starting the oven
Press the 
button to select the desired manual cooking mode. The cooking temperature and duration may be set.
Press the 
button to select the desired automatic cooking mode. The cooking temperature and duration are both set to default values. The duration may be modified by ±5/10 minutes, depending on the selected cooking mode. The text “In” which appears on the TEMPERATURE display stands for “place the food IN the oven”. A delayed cooking cycle may be programmed.
Begin cooking by pressing the “START/STOP” button. The oven will begin its preheating stage, and the current preheating temperature indicator lights illuminate when this stage is complete. The temperature of the manual cooking modes may be adjusted by pressing the “+” and
When the preheating stage is complete, a buzzer sounds and all current preheating temperature indicator lights are illuminated: place the food in the oven.
During cooking it is always possible to:
- Change the temperature by pressing the “+” and “-
”buttons on the left hand side of the control panel (manual cooking modes only).
- Interrupt cooking while maintaining the set duration by pressing the START/STOP button.
5
