Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

_Unscrew the cable clamp screw and the contact screws L-N-$.

Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green￿ $

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

TABLE OF CHARACTERISTICS

 

width 43.5 cm

Dimensions

height 32 cm

 

depth 40 cm

Volume

56 l

Electrical

voltage: 220-240V ~ 50/60Hz

 

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A Supply cable:

3x1.5mm2

connections

maximum power absorbed

2800 W

 

 

 

 

Directive 2002/40/EC on the

 

label of electric ovens.

 

Regulation EN 50304

 

ENERGY LABEL

Declared energy

 

 

 

 

consumption for Forced

 

convection Class

 

 

– heating mode:

Gratin

This appliance conforms to the following European Economic Community directives: 2006/95/EEC dated 12/12/06 (Low

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Voltage) and subsequent amendments - 89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments.

2002/96/EEC

3

Page 3
Image 3
Hotpoint SE103PGX, SQ103PGI manual Electrical Connection, This Appliance Must be Earthed

SE103PGX, SQ103PGI specifications

The Hotpoint SQ103PGI and SE103PGX are modern cooking appliances that bring together advanced technology and user-friendly features to elevate the culinary experience. These models are perfect for those who appreciate quality cooking within the comfort of their homes.

One of the key features of the Hotpoint SQ103PGI is its gas cooking capability. It offers precise temperature control, allowing users to achieve the perfect level of heat for various cooking methods. The SE103PGX, on the other hand, excels with its electric cooking system, ensuring even heat distribution across the cooking surface, resulting in perfectly cooked dishes every time. Both models are designed with an intuitive control panel that facilitates easy navigation through different cooking functions.

The SQ103PGI comes equipped with multiple cooking zones, providing flexibility for multiple pots or pans. This is particularly useful for preparing elaborate meals where timing is crucial. The SE103PGX features a responsive touch control panel along with a timer function, enabling users to focus on other tasks without the worry of overcooking.

In terms of safety, both models are designed with built-in safety features. The SQ103PGI incorporates flame failure devices that automatically cut off the gas supply if the flame goes out, ensuring peace of mind while cooking. Similarly, the SE103PGX includes child locks and automatic shut-off features, prioritizing safety in the kitchen environment.

Both the SQ103PGI and SE103PGX benefit from modern aesthetics, with sleek designs that complement contemporary kitchens. They are crafted from durable materials that not only enhance their longevity but also simplify cleaning processes. A smooth ceramic surface in the SE103PGX, for instance, allows for easy wiping, while the gas burners in the SQ103PGI feature removable parts for quick maintenance.

Innovative technologies are incorporated into both appliances. The SQ103PGI utilizes a precision flame control feature that adjusts the intensity of the flame based on the cooking requirements. Likewise, the SE103PGX offers various cooking modes such as convection and grill functions, ideal for multi-purpose cooking.

In summary, the Hotpoint SQ103PGI and SE103PGX represent a blend of functionality, style, and safety. With features aimed at diverse cooking styles, intuitive controls, and safety measures, they cater to the needs of both amateur cooks and seasoned chefs. Investing in either of these appliances means enhancing your cooking experience while enjoying the benefits of modern technology.