Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

WARNING: THIS APPLIANCE MUST BE EARTHED.

Mounting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To mount the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws.

Position the jumpers accordingly to the type of connection you wish to make as per the diagrams below.

Note: The jumpers are factory set for a 230V single phase connection.

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

IMPORTANT:

After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

Electrical Connections:

1

2

3

4

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

N

 

 

Voltage Frequency:

 

 

 

230 V-1+N 50Hz

Fuse Section:

 

 

 

 

32A 4mm3

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

This appliance conforms to the following EEC Directives:

Low Voltage Equipment 73/23/EEC 93/68/EEC

Electromagnetic Compatibility 89/336/EEC

93/68/EEC

Inner dimensions of the oven:

width 43.5cm

depth 43.5cm

height 32.0cm

Inner volume of the oven:

60 litres

Voltage and frequency of power supply:

230-240V

50-60Hz

2250-2400W

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Declared energy consumption for Natural convection Class

heating mode: Convection

1 1

Page 11
Image 11
Hotpoint SY11 manual Electrical Connection

SY11 specifications

The Hotpoint SY11 is a freestanding slimline dishwasher that embodies innovation, efficiency, and practicality. Designed to cater to modern households, particularly those with limited kitchen space, this model is not only compact but also packed with features that optimize cleaning performance and energy efficiency.

One of the main characteristics of the Hotpoint SY11 is its ability to accommodate up to 10 place settings, making it ideal for small families or kitchens where space is at a premium. Its slim design, measuring just 45 cm in width, allows it to fit comfortably in tight spaces while still providing ample capacity for cookware, plates, and utensils.

Incorporating advanced technologies, the SY11 boasts an A+ energy rating, signifying its efficiency in energy consumption. This efficiency is not just beneficial for the environment; it also translates into lower utility bills for the user. The model features a range of wash programs tailored to different cleaning needs, including an Eco cycle that uses less water and energy, ensuring that dishes are cleaned effectively while minimizing impact on resources.

The Hotpoint SY11 also features an adjustable top basket, allowing for larger items to fit comfortably in the bottom rack without sacrificing space. This flexibility is particularly useful for items such as larger pots and pans, which can often be challenging to clean in traditional dishwashers.

With user convenience in mind, the SY11 is equipped with a delay timer option, allowing users to set the dishwasher to start during off-peak hours or when it is most convenient. Additionally, the intuitive control panel makes it easy to select the desired washing program, ensuring a hassle-free experience.

The noise level of the SY11 is another noteworthy attribute. Operating at a sound level of just 49 dB, it ensures a quiet operation, making it suitable for open-plan living spaces where noise can be a concern.

Durability is emphasized in its design, with high-quality materials and finishes that ensure longevity. The interior of the dishwasher is crafted to resist stains and corrosion, guaranteeing that it remains in top condition for years of reliable service.

Overall, the Hotpoint SY11 stands out as a versatile and efficient dishwasher tailored for those seeking a compact solution without sacrificing performance. Its array of modern features positions it as a smart choice for any discerning homeowner looking to streamline their kitchen operations.