3
Important
Information Installation Description Start and
Programmes Laundry Warnings and
Suggestions Maintenance
and Care Service
Troubleshooting
GB
Important Information

Condenser Unit...

!You MUST clean the fluff from the condenser EVERY
month.
!Failure to clean the condenser could cause premature
failure of your dryer.
●Check that:
- The positioning arrows are pointing upwards.
- The 3 clips are re-secured back into their ‘lock’position.
STEP 3.
Flush the condenser, from
the rear with water, to
remove any fluff deposits.
STEP 4.
Refit the condenser unit
- ensure that the unit is
pushed in fully, all 3 clips
are re-secured and the
positiong arrows on the
front of the condensera re
pointing upwards.
Rotate 3 clips
STEP 1.
Open the condenser cover
- hold the handle and
pull towards you.
STEP 2.
Remove the condenser by
rotating the 3 clips then
pulling the condenser
towards you.
(There may be some water
in the tubes, this is normal).