For your safety

ALWAYS ●

When the dryer is not in use, switch off, remove plug, and

ALWAYS ●

close the door.

Comply with the specified electrical requirements.

ALWAYS ●

Ensure that the mains cable and plug is completely withdrawn from

ALWAYS ●

its storage place in the rear exhaust duct.

Ensure that your dryer is installed correctly and has adequate

ALWAYS ●

ventilation.

Use the vent hose for optimum drying performance.

ALWAYS ●

Finish every programme with the cool tumble cycle provided on

 

the control.

ALWAYS ●

Clean the filter, it is essential that the filter is kept clear of fluff

ALWAYS ●

at all times.

Observe the rules for drying garments:

 

In particular woollen articles should not be dried in a

 

tumble dryer unless they are labelled ‘Superwash’,

 

‘Machine washable’ or have the ‘May be tumble dried’

 

symbol:

 

If in any doubt do not dry wool in the machine.

 

Unlike other materials, the mechanism of wool

 

shrinkage is irreversible, i.e. it will not stretch back to

ALWAYS ●

the original size and shape.

Buy genuine accessories and spares.

 

 

Electrical Requirements

Changing the mains cable

WARNING: This appliance must be earthed!

REFER TO THE RATING PLATE FOR VOLTAGE AND CURRENT REQUIREMENTS.

The dryer should be connected to the mains supply via a suitable socket which is accessible after installing your dryer.

The wires in the mains lead are coloured in accordance with the following:

GREEN/YELLOW - EARTH

BLUE- NEUTRAL

BROWN - LIVE

If a replacement plug is to be fitted, the appropriate wire must be connected to the correct terminal,the cut-off plug must be disposed of safely. DO NOT leave where it can be inserted into a socket and create a shock hazard.

Should the mains lead ever require replacing at any time please contact your nearest Service Centre. A charge will be made for the replacement of the mains lead or if you require a longer lead.

The mains lead must only be replaced by a specially prepared cable obtainable from your Spares Stockist and fitted by a qualified electrician.

4

NOTE: IF IN DOUBT ABOUT ANY OF THE ABOVE CONSULT A QUALIFIED ELECTRICIAN.

Page 5
Image 5
Hotpoint TL64 manual Electrical Requirements, Always