Important Information
For your Venting dryer to operate efficiently, you must follow the regular maintenance schedule shown below:
GB
Fluff Filter...
!You MUST clean the fluff filter after EVERY drying cycle.
STEP 1. |
| STEP 2. |
Open the door of your |
| Pull out the filter (using |
dryer. |
| the two finger grips). |
|
|
|
|
|
|
STEP 3.
Clean any fluff deposits from the filter mesh.
STEP 4.
Refit the filter.
-Make sure the arrows are facing you.
STEP 5.
Make sure the filter is pushed fully home.
-NEVER run the dryer without the filter in position.
!Failure to clean the filter after EVERY drying cycle will affect the drying performance of your machine.
-It will take longer to dry and as a result will use more electricity during drying.
!You MUST clean fluff build up around the filter housing and the vent tube periodically, EVERY two or three months:
-Check the vent tube and any permanent venting fixture to make sure that there has been no accumulation of fluff or lint, and remove it.
-Remove lint that collects around the filter and the outlet vents.
2
