Hotpoint ULTIMA manual The first wash cycle, Technical data, Disposing of the appliance

Models: ULTIMA

1 16
Download 16 pages 82 b
Page 4
Image 4
Disposing of the appliance:

As the colours of the wires in the lead may not GB correspond with the coloured markings iden-

tifying the terminals in your plug, proceed as follows:

Connect Green & Yellow wire to terminal marked E or The first wash cycle or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked L or coloured Red.

Connect Blue wire to terminal marked N or coloured Black.

If a 13 amp plug (BS 1363) is used it must be fitted with a

13 amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt regarding the electrical supply to your machine, consult a qualified electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in accordance with the following code:

BLUE

 

NEUTRAL (N)

BROWN

 

LIVE (L)

GREEN & YELLOW

EARTH (E)

 

 

 

GREEN &

 

 

YELLOW

 

 

BROWN

13 ampere fuse

 

 

 

BLUE

CROSS-BAR

 

 

CORD GRIP

 

 

 

 

Disposing of the appliance:

When disposing of the appliance please re- move the plug by cutting the mains cable as close as possible to the plug body and dispo- se of it as described on the previous page.

!The washing machine should not be installed in an outdoor environment, not even where the area is sheltered, because it may be very dangerous to leave it exposed to damp, rain and thunderstorms.

!When the washing machine is installed, the mains socket must be within easy reach.

!Do not use extensions or multiple sockets.

!The power supply cable must never be bent or dangerously compressed.

!The power supply cable must only be repla- ced by an authorised serviceman.

Warning! The company denies all liability if and when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, using the programme “Auto Clean” (see “Cleaning the washing machine”).

Technical data

Model

SWMD 9637

 

 

 

 

 

 

 

width 59.5 cm

Dimensions

height 85 cm

 

 

 

depth 60.5 cm

Capacity

from 1 to 9 kg

 

 

 

 

Electrical

please refer to the technical

data plate fixed to the ma-

connections

chine

 

 

 

maximum pressure

Water con-

1 MPa (10 bar)

minimum pressure

nections

0.05 MPa (0.5 bar)

 

 

 

 

 

 

drum capacity 62 litres

SPIN

up to 1600 rotations per

minute

 

 

 

Test wash

programme 2 (60°)

cycles in

accordan-

(1st press of the button);

ce with

Cotton Standard 60°C.

directives

programme 2 (40°)

1061/2010

(2nd press of the button);

and

Cotton Standard 40°C.

1015/2010

 

 

 

 

This appliance conforms to

 

 

 

the following EC Directives:

 

 

 

- 2004/108/EC (Electroma-

 

 

 

gnetic Compatibility)

 

 

 

- 2006/95/EC (Low Voltage)

 

 

 

- 2012/19/EU

 

 

 

 

4

Page 4
Image 4
Hotpoint ULTIMA manual The first wash cycle, Technical data, Disposing of the appliance, 1st press of the button