Installation

 

! Keep this instruction manual in a safe place

GB

for future reference. Should the appliance be

 

sold, transferred or moved, make sure the

 

instruction manual accompanies the washing

 

machine to inform the new owner as to its

 

operation and features.

 

! Read these instructions carefully: they contain

 

vital information on installation, use and safety.

 

Unpacking and levelling

ning the adjustable front feet (see figure); the angle of inclination, measured according to the worktop, must not exceed 2°.

Levelling your appliance correctly will provide it with stability and avoid any vibrations, noise and shifting during operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the washing machine.

Electric and water connections

Unpacking

!This is a separate part of the polystyre- ne base and should be removed with the base.

!IMPORTANT check when unpacking your machine.

Connecting the water inlet hose

1. Connect the supply pipe by screwing it to a cold water tap using a 3/4 gas threaded con- nection (see figure).

Before performing the connection, allow the water to run freely un- til it is perfectly clear.

1.Unpack the washing machine.

2.Check whether the washing machine has been damaged during transport. If this is the case, do not install it and contact your retailer.

3.Remove the 4 pro-

tective screws and

the rubber bush with

the respective spacer, situated on the rear of the appliance (see also the installation leaflet).

4. Seal the gaps using

the plastic plugs provi-

ded.

5. Keep all the parts:

you will need them again if the washing machi- ne needs to be moved to another location.

!Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if the two front feet have not been adjusted correctly.

1. Install the washing machine on a flat sturdy floor, without resting it up against walls, cabi- nets or anything else.

2. If the floor is not per- fectly level, compensa- te for any unevenness by tightening or loose-

2. Connect the other end of the water inlet hose to the washing machine, screwing it onto the appliance’s cold water inlet, situated on the top right-hand side on the rear of the applian- ce (see figure).

3.Make sure there are no kinks or bends in the hose.

!The water pressure at the tap must be within the values indicated in the Technical details table (on the page 5).

!If the water inlet hose is not long enough, contact a specialist store or an authorised serviceman.

!Ensure that the supply taps are allowing wa- ter through. Old taps may seize in the closed position and thus prevent water reaching the machine.

!Never use second-hand or old inlet hoses; use the products supplied with the machine.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint ULTIMA manual Installation, Unpacking and levelling, Electric and water connections
Page 1 Page 3

ULTIMA specifications

The Hotpoint ULTIMA series is a line of innovative home appliances designed to enhance your kitchen experience with their advanced features and sleek design. Renowned for their reliability and performance, these appliances cater to a variety of cooking and food preservation needs, making them a popular choice for households looking for efficiency and convenience.

One of the standout features of the Hotpoint ULTIMA range is its unique Smart Technology. This includes sensors that monitor cooking parameters, adjusting heat and time automatically to ensure perfectly cooked meals every time. Whether you're baking, roasting, or grilling, the ULTIMA appliances offer precise control that saves you time and energy.

The ULTIMA line also boasts an impressive energy efficiency rating. With advancements in technology, these appliances consume less energy while delivering exceptional performance. This not only helps reduce your carbon footprint but also decreases your utility bills, making it an environmentally friendly choice for modern kitchens.

Another notable characteristic is the spacious interior designs that the ULTIMA ovens offer. With varying capacities, users can select models that best suit their household size. The roomy interiors allow for the cooking of large meals, making it perfect for families or those who love to host gatherings.

Moreover, the ULTIMA series features an easy-to-clean design. The interiors are often coated with self-cleaning enamel, which helps reduce food residue and grime buildup. Additionally, the removable components make it simple to maintain the appliance, ensuring it remains in optimal condition for years to come.

Hotpoint's commitment to user safety is evident in the ULTIMA appliances as well. Many models come equipped with safety features such as cool touch doors, child lock options, and automatic shut-off functions to prevent accidents during cooking.

Incorporating stylish aesthetics, the ULTIMA series is designed to complement any kitchen decor. With a variety of finishes available, including stainless steel and sleek black, these appliances not only perform well but also add a modern touch to your culinary space.

In summary, the Hotpoint ULTIMA series combines cutting-edge technology, energy efficiency, spacious designs, ease of cleaning, safety features, and appealing aesthetics, making it an ideal choice for those who cherish quality and performance in their kitchen appliances.
Top Page Image Contents