Installation
Remove the transit fixings
IMPORTANT: Follow these instructions to remove the TWO transit fixings (see Description for location).
!Situated one either side of the rear panel,
BOTH transit bolts MUST be removed before use.
Location of transit bolts.
!Failure to do so may cause damage to your machine.
!It is important the TWO transit fixings come out intact.
!Be sure to remove TWO bolts,
TWO washers, TWO rubber grommets and TWO nylon spacers (see pic).
1.Unscrew the bolt using a 13mm spanner.
2.STOP when 3 threads can be seen.
3.Hold, slide sideways and pull to remove.
4.For safety, insert one of the the plastic covers (supplied with your machine) over the hole.
!Repeat steps 1 to 4 to remove the second transit bolt.
!Packaging materials are not children's toys.
Location
Where you install your machine will affect its performance:
!For your safety and to comply with electrical regulations, seek professional advice if you want to install your machine in a bath or shower room.
●Make sure that the electrical socket and water taps are easily accessible. You should switch off the machine’s electrical and water supplies when you are not using it for extended periods.
●Make sure that you allow enough space for the machine. Select a space at least 60cm wide, 60cm deep and 85cm high. Also leave enough space to open the door fully, so that you can load and unload it easily.
●Where possible, the machine should be positioned on a solid floor to minimise vibration.
!Take care when you move the machine not to rip any floor coverings. The weight of the machine may cause indentations in some floor coverings.
GB
Description |
|
|
|
Contents |
|
|
|
Installation |
|
|
|
Features | ControlPanel |
|
|
Modifiers | and Programmes Option |
|
|
andLaundry | Detergents |
|
|
Maintenance | Careand |
|
|
andAdvice | Precautions |
Did you know?...
●...the transit fixings are fitted to ensure that your machine is undamaged during delivery.
●...both of the transit fixings MUST BE removed before using the machine, be sure to remove TWO bolts, TWO washers, TWO rubber grommets and TWO nylon spacers, not doing so will lead to excessive vibration, movement of the machine and could eventually lead to internal damage.
●...the majority of problems with noisy machines are due to the transit fixings not being removed.
●...you will be charged for a service engineers visit if a problem with your machine is caused by incorrect installation or misuse.
Troubleshooting | Wrong?- | Something |
Service |
|
|
5
