Starting a Programme

Starting a typical wash programme

1.Switch the machine on by pressing the ON/OFF Pause button.

2.Sort your laundry into groups by washcare labels. Load the machine.

Close the machine door by pushing it until it clicks.

3.Add detergent and fabric conditioner to the dispenser drawer.

!Refer to detergent manufacturer’s dosage instructions.

4.Select the programme: - press the programme selector button the required number of times (see Programme Table).

!The LCD display will change on each press to show the

temperature of the selected programme.

5.Select any optional wash feature(s) (see Option Modifiers) you require by pressing the appropriate button(s).

- Indicator lights on the LCD display will show what you have chosen.

6.Reduce the wash temperature of your selected programme:

- Press the Temp button, each press will reduce the wash temperature by 5˚C.

The new temperature will be shown in the LCD display.

7.Reduce the spin speed of your selected programme:

- Press the Spin button, each press will reduce the spin speed.

The new spin speed will be shown in the LCD display.

8.In addition to showing you all information relating to your programme selections, the LCD display will show you the stage of a programme in progress, the time remaining until the end of a

programme in hours and minutes (counting down each minute) and the door lock status.

- If ‘Time Delay’ option was selected the display will show the time remaining until the start of the wash programme in hours (counting down each hour).

9.Start the programme by

pressing the START/CANCEL button for at least 3 seconds.

!The ‘Door Locked’ indicator,will light up.

To stop/change a programme once the machine has started:

-Press the START/CANCEL button until a beep is heard.

-The machine will start to empty.

When the machine has finished emptying:

-Selector the new programme required (you may need to add detergent).

-Press the START/CANCEL button to start the new programme.

10.During the programme, the status indicator lights will show you what stage in the programme the machine has reached (wash, rinse, spin).

11.A short time after the programme has finished the ‘Door Locked’ indicator will go out and you can open the machine door.

12.Switch the machine off by pressing the ON/OFF Pause button.

!Do not allow children to play with the machine or tamper with the controls.

!Do not overload the machine. This may damage the laundry and reduce the quality of the wash.

The maximum load is 7kg (Cotton).

!Do not try to open the dispenser drawer during any programme.

!Do not try to open the machine door when the ‘Door Locked’ indicator is lit.

GB

Description

 

 

 

 

 

Contents

 

 

 

 

 

Installation

 

 

 

 

 

Features

ControlPanel

 

 

 

 

Modifiers

andOption

Programmes

 

 

 

andLaundry

Detergents

 

 

 

 

Maintenance

Careand

 

 

 

 

andAdvice

Precautions

 

 

 

 

Troubleshooting

Wrong?-

Something

 

 

 

Service

 

 

9

Page 9
Image 9
Hotpoint Ultima LCD manual Starting a Programme, Starting a typical wash programme, ‘Door Locked’ indicator, will light up