Starting a Programme

Starting a typical wash programme

1.Switch the machine on by pressing the On/Off button.

2.Sort your laundry into groups by washcare labels. Load the machine.

Close the machine door by pushing it until it clicks.

3.Add detergent and fabric conditioner to the dispenser drawer.

!Refer to detergent manufacturer’s dosage instructions.

4.Turn the programme selector dial to the required programme.

5.Select any optional wash feature(s) (see Option Modifiers) you require by pressing the appropriate button(s).

- Indicator lights will show what you have chosen.

6.Reduce the programmes wash temperature:

Turn the Variable Temperature dial to the reduced temperature you require.

! When the programme has finished return the dial to its maximum setting.

7.Reduce the programmes spin speed: Turn the Variable Spin Speed dial

to the reduced Spin Speed you require.

! When the programme has finished return the dial to its maximum setting.

8.Start the programme by pressing the Start/Cancel button for at least 3 seconds. The ‘Door Locked’ indicator will light up.

●To stop/change a programme once the machine has started:

-Press the Start/Cancel button for 3 seconds.

-Select ‘Pump Out’ on the Programme selector

dial.

When the machine has finished emptying:

-Turn the Programme selector dial to the new programme required (you may need to add detergent).

-Press the Start/Cancel button to start the new programme.

9.During the programme,

the status indicator lights will show you what stage in the programme the machine has reached (wash, rinse, spin).

10.A short time after the programme has finished the ‘Door Locked’ indicator will go out and you can open the machine door.

11.Switch the machine off by pressing the On/Off button.

!Do not allow children to play with the machine or tamper with the controls.

!Do not overload the machine. This may damage the laundry and reduce the quality of the wash.

The maximum load is 6kg (Cotton).

!Do not try to open the dispenser drawer during any programme.

!Do not try to open the machine door when the ‘Door Locked’ indicator is lit.