4 Connecting to a Windows NT Server 4.0
Windows 95 SR2
Windows 95 SR2 | Requirements |
| • HP Vectra with Windows 95 SR2. |
| • IBM AUTO LANStreamer PCI card and drivers disk |
| Driver Name: W95setup.inf Size: 40KB Date: 9/17/96 |
| • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ |
| IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. |
Device Configuration
• | I/O Base Address | FC00h |
• | Interrupt Request Level | 9 |
Procedure
1With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot.
2Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
3After the machine boots, verify that the adapter finished testing and that the adapter is “OK.”
4Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5When Windows 95 restarts a message will appear that new hardware has been found.
6Insert disk , 4 of 6, IBM Auto LANStreamer driver diskette.
7Click the “Next” button to begin hardware wizard.
8Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:\WIN95” then click “OK” (If you have an HP pre- loaded HDD, set the path statement to “C:\LANDRV\LNSTRM\DISK4\WIN95\”).
9“IBM Auto LANStreamer PCI Adapter(NDIS3)” should now be listed. Click on “Finish.”
10When prompted to insert the disk labeled “IBM Streamer Family Adapter Option Diskette”, click “OK.”