Output Bin Command This command selects the destination bin into which the print job is output when printed.

?&l#G

#= 0 - Automatic selection

1 - Selects bin #1 (printer top/face-down bin)

2 - Selects bin #2 (printer left/face-up bin; this bin not available when the High Capacity Output (HCO) is attached)

3 - Selects bin #3 (HCO face up bin)

4 - Selects bin #4 (HCO #1 face down bin)

5 - Selects bin #5 (HCO #2 face down bin)

6 - Selects bin #6 (HCO #3 face down bin)

7 - Selects bin #7 (HCO #4 face down bin)

8 - Selects bin #8 (HCO #5 face down bin)

9 - Selects bin #9 (HCO #6 face down bin) 10 - Selects bin #10 (HCO #7 face down bin) 11 - Selects bin #11 (HCO #8 face down bin)

Default = 0

Range = 0 to 11

Note The Output Bin command is not recommended. Instead, it is preferred that the PJL OUTBIN command be used to set the default media destination.

2-78 Printer-Specific Differences