Maintenance & Service Guide

Presario 1200 Series

Models: 1230 and 1232

Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Map Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations

Power Management for Windows 95

The following power management features are available for conserving AC power and extending battery operating time:

Power Management Settings

Sleep

Hibernation

Battery Operating Time

Power Management Settings

You can select power conservation settings through Power Management located on the System Features menu in Computer Setup. Computer Setup can be accessed by pressing F10 when the Compaq logo appears on the screen. These settings control the power conservation rate and the timeout values for various system components. A timeout is a specified period of system or component inactivity. After this period, the system or component (for example, the hard drive) is shut down to conserve power until it is accessed again.

There are four categories of power management settings: Maximum Power Saving, Maximum Performance, Customized, and Disabled. The default setting for each feature is listed in below table.

Power Conservation Default Time-out Settings

 

Features

Maximum

Maximum

Customized

Disabled

 

Power

Performance

 

 

 

Saving

 

 

 

Idle Mode

On

Off

Off

Off

Sleep Timeout

5 minutes

60 minutes

15 minutes

Off

Resume On Time

Off

Off

Off

Selectable

Resume Time

Selectable

Selectable

Selectable

Selectable

Hard Drive Timeout

10 seconds

15 minutes

5 minutes

Disabled

Sleep

Sleep is a power conservation mode that performs the following functions:

Turns off the display after a selected period of inactivity.

Automatically reduces the amount of power the computer uses.

The computer is immediately ready for use when any key is pressed.

Sleep mode is indicated by the blinking Power On LED.

The computer may be manually put in Sleep mode by pressing the Fn + F4 keys.

Hibernation Mode

Hibernation is a power conservation mode that performs the following functions:

Saves all current information from memory to a file on the hard drive.

Turns off the computer.

Can be restored after any amount of time.

The Hibernation file is preinstalled on the hard disk. The Hibernation file is slightly larger than the total RAM memory of the computer (system memory, memory expansion board, video memory). The Hibernation 100-MB partition can be reinstalled with the QuickRestore CD.

Hibernation is initiated by one of the following means:

Automatically when the system is operating on Battery Power and has been in Sleep Mode for 60 minutes.

Automatically when the battery reaches a low battery level.

Manually by pressing the power button.

When the Power button is pushed, the computer exits Hibernation.

Battery Operating Time

Battery operating time is affected by variables, such as the following:

Power conservation settings

Hardware configuration

Software applications

Installed options

Display brightness

Hard drive usage

Power button

Changes in operating temperature

Type and number of installed PC Cards

For more information on increasing battery pack operating time, conditioning the battery pack, and disposing of a used battery pack, refer to the Battery Pack

Operations.

Page 18
Image 18
HP 1230 manual Operations