![](/images/new-backgrounds/1241579/24157995x1.webp)
Maintenance & Service Guide
Presario 1200 Series
Models: 1230 and 1232
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Palmrest Cover with Touch Pad
Electrostatic
Discharge
Service Considerations
Cables and Connectors
Preparing the Computer for Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery Charger Board
Modem
Display Panel Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive Fan Assembly
System Board
Memory
Module
The palmrest cover with touch pad must be removed to gain access to any of the interior components of the computer, and it is the first component that has to be removed to gain access to the interior components.
It is not necessary to remove the display panel
NOTE: assembly to access the interior components of the computer.
To remove the palmrest cover with touch pad, complete the following steps:
1.Prepare the computer for disassembly.
2.Close the computer and turn the computer upside down.
3.Remove four screws from the bottom of the computer.
Next Step