![](/images/new-backgrounds/1332862/33286227x1.webp)
QuickSpecs
HP SAS Hard Drives
Technical Specifications
HP 450GB 6G SAS 15K rpm | Capacity | 450,098MB | |
LFF |
| Height | 1.06 in (26.8 mm) |
Enterprise 3yr Warranty |
| ||
| Width | 4.16 in (105.8 mm) | |
Hard Drive |
| ||
| Depth | 6.69 in (170.0 mm) | |
|
| ||
|
| Interface | SAS |
|
| Transfer Rate | 6 Gb/sec |
|
| Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.2 ms |
Average | 3.5 ms |
6.8 ms | |
Rotational Speed | 15000 rpm |
Bytes/Sector | 512 |
Logical Blocks | 879,097,968 |
50° to 95° F (10° to 35° C) |
|
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
Application | SAS Midline drives are intended for servers and storage solutions where high capacities are required. |
| These drives have |
| applications, such as disk backup, archival, and reference applications. |
|
|
Transfer rate | The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server |
| backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated |
| down to an acceptable level for all components. |
|
|
HP 4TB 6G SAS 7.2K rpm | Capacity | 4,000,787MB |
| |
LFF |
| Height | 1.06 in (26.8 mm) |
|
1yr Warranty Hard Drive |
|
| ||
| Width | 4.16 in (105.8 mm) |
| |
|
|
| ||
|
| Depth | 6.69 in (170.0 mm) |
|
|
| Interface | SAS |
|
|
| Transfer Rate | 6 Gb/sec |
|
|
| Synchronous (Maximum) |
|
|
|
| Seek Time | Single Track | 0.7 ms |
|
| (typical reads, including | Average | 8.5 ms |
|
| settling) | 15.7 ms | |
|
|
| ||
|
|
| Rotational Speed | 7200 rpm |
|
| Physical Configuration | Bytes/Sector | 512 |
|
|
| Logical Blocks | 7,814,037,168 |
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 14 |