QuickSpecs
HP SAS Hard Drives
Technical Specifications
|
| Operating Temperature | 50° to 95° F (10° to 35° C) |
|
| (System Inlet Air |
|
|
| Temperature) |
|
|
|
|
|
HP 1TB 6G SAS 7.2K rpm | Capacity | 1,000,204,886,016 | |
LFF |
| Height | 1.04 in (26.4 mm) |
Midline 1yr Warranty Hard |
| ||
| Width | 4.36 in (110.7 mm) | |
Drive |
| ||
| Depth | 7.43 in (188.7 mm) | |
|
| ||
|
| Interface | SAS |
|
| Transfer Rate | 6 Gb/sec |
|
| Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.5 ms |
Average | 8.5 ms |
16.2 ms | |
Rotational Speed | 7,200 rpm |
Bytes/Sector | 512 |
Logical Blocks | 1,953,525,168 |
50° to 95° F (10° to 35° C) |
|
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Application | SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work |
| load intensive applications where 24/7 duty cycles are a requirement, such as database applications and |
| high transaction level applications. |
|
|
Transfer rate | The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server |
| backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated |
| down to an acceptable level for all components. |
|
|
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 26 |