QuickSpecs
HP SAS Hard Drives
Technical Specifications
|
| Operating Temperature | 50° to 95° F (10° to 35° C) |
|
| (System Inlet Air |
|
|
| Temperature) |
|
|
|
|
|
HP 300GB 6G SAS 15K rpm | Capacity | 300,000,000,000 | |
LFF |
| Height | 1.04 in (26.4 mm) |
Enterprise 3yr Warranty |
| ||
| Width | 4.36 in (110.7 mm) | |
Hard Drive |
| ||
| Depth | 7.43 in (188.7 mm) | |
|
| ||
|
| Interface | SAS |
|
| Transfer Rate | 6 Gb/sec |
|
| Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.2ms |
Average | 3.5ms |
6.8ms | |
Rotational Speed | 15,000rpm |
Bytes/Sector | 512 |
Logical Blocks | 585,937,500 |
50° to 95° F (10° to 35° C) |
|
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Application | SAS Midline drives are intended for servers and storage solutions where high capacities are required. |
| These drives have |
| applications, such as disk backup, archival, and reference applications. |
|
|
Transfer rate | The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server |
| backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated |
| down to an acceptable level for all components. |
|
|
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 22 |