4 Attach the control panel overlay (if not attached)

aBend the bottom of the control panel overlay.

bRemove the bottom tab and the backing from the overlay.

cLift the lid. Insert the tabs of the overlay into the device. Make sure the tabs are inserted correctly before sticking the overlay to the device.

dPress down on the overlay to ensure it is firmly attached. Do not press on the LCD area. The tabs must be in the slots.

CAUTION: The control panel overlay must be attached for the HP All-in-One to work!

5 Connect the power cord and adapter

Important: Do not connect the USB cable until instructed later in this guide.

2 • HP All-in-One