16 Finish software installation

Windows Users:

Follow the onscreen instructions. Complete the Sign up now screen. Congratulations!

Macintosh Users:

aInsert the HP All-in-One Macintosh CD.

bDouble-click the HP All-in-One Installer icon.

cMake sure you complete all screens, including the Setup Assistant. Congratulations!

Troubleshooting Software

Problem: (Windows only) You did not see the screen telling you when to connect the USB cable.

Action: Remove, and then re-insert the HP All-in-One Windows CD. Refer to

Step 14.

Problem: (Windows only) The Microsoft Add Hardware screen appears.

Action: Click Cancel. Unplug the USB cable, and then insert the HP All-in-One

Windows CD. Refer to Steps 14 and 15.

Problem: (Windows only) The Device Setup Has Failed To Complete screen appears.

Action: Verify that the control panel overlay is firmly attached. Unplug the device and plug it in again. Check all connections. Make sure the USB cable is plugged into the computer. Do not plug the USB cable into a keyboard or non- powered hub. Refer to Steps 4 and 15.

HP All-in-One • 7