Setting Up the Monitor
3.Remove the three screws 2 as shown in the following illustration.
Removing the Monitor Base
ÄCAUTION: Ensure that the bottom of the monitor base is positioned over a table or desktop before removing the base from the monitor.
4.Remove the monitor base 3 from the monitor.
Mounting the Monitor
1.Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section.
After the base is removed from the monitor, four threaded mounting holes are exposed on the monitor back panel to be used for mounting purposes. These mounting holes are 100mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays.
User Guide |
