Removing and Replacing an Add-in Card
Before You Begin
Observe the following requirements before removing and replacing an
Tools Needed
Flathead screwdriver
You can use a flathead screwdriver with the following screw (Torque screw).
CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components.
WARNING:
Never open the cover with the power cord attached or power applied. You may damage your computer or be injured from the spinning fan blades.
Avoid touching sharp edges inside the computer.
Removing an Add-in Card
1Remove the Pocket Media Drive, if it is present. Remove the Personal Media Drive, if it is present.
2Turn off the computer.
3Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last.
NOTE: Computer features may vary by model.
2 |
|
