HP 200-5110 manual Replacing an Add-in Card

13Remove the card:

￿If there is a release latch, place your finger on the latch and push down on the pad (or out on the lever) as you lift the card from the socket.

￿If there is no release latch, rock the card to free it, and then lift the card from the socket.

Replacing an Add-in Card

IMPORTANT: The new (replacement) part may not look the same as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications.

1Align the edge of the add-in card with the open slot (1) in the computer, and then press the card straight down until it is fully seated in the socket (2).

2

1

2

1

537503-001— Removing and Replacing an Add-in Card 5