5.If it is necessary to replace the webcam/microphone module:
CAUTION: Handle the webcam/microphone module with caution. The module has a thin profile and is susceptible to damage when not handled carefully.
a.Detach the webcam/microphone module (1) from the display enclosure. (The webcam/ microphone module is attached to the display enclosure with
b.Detach the webcam/microphone module cable (2) from the display enclosure. (The webcam/microphone module cable is attached to the display enclosure with double- sided tape.)
c.Disconnect the webcam/microphone module cable (3) from the webcam/ microphone module.
d.Remove the webcam/microphone module (4).
The webcam/microphone module is available using spare part number
6.If it is necessary to replace the WLAN antenna cables and transceivers:
a.Detach the WLAN antenna transceivers (1) from the display enclosure. (The WLAN antenna transceivers are attached to the display enclosure with
b.Release the WLAN antenna cables from the clips (2) and routing channel built into the display enclosure.
88 | Chapter 4 Removal and replacement procedures |