7.Rotate the bottom edge of the access panel up (2), and then lift the access panel off of the computer (3).

Figure 3-7Removing the access panel

8.Place the access panel down on a flat surface with the inside of the panel facing up.

9.Remove the three screws (1) securing the stand to the access panel, and then remove the stand

(2).

Figure 3-8Removing the stand

NOTE: Save the screws together with the stand in case they are needed in the future.

10.Set the top edge of the access panel down on the top edge of the computer chassis (1). Be sure to align the hooks on the underside of the top edge of the access panel with the top edge of the computer.

11.Rotate the bottom edge of the access panel down (2) and press it firmly onto the chassis until it locks into place.

18 Chapter 3 Hardware repair and upgrade