Basic Setup

Follow the steps in the Start Here booklet to set up the HP Digital Entertainment Center.

Most of the hardware devices such as the monitor and printer can be connected at the back panel of the HP Digital Entertainment Center.

Some peripheral devices, such as a digital video camera, can be plugged into the connectors on the back panel or the front panel (behind lower doors) of the HP Digital Entertainment Center.

Overview

Setting Up the HP Digital Entertainment Center

Installation

The basic steps to set up the HP Digital Entertainment Center are in the Start Here booklet as follows. Your system may be different. See the referenced sections for detailed information on each step.

Before you begin:

Read “Safety Information” on page 17.

Read “Installation Guidelines” on page 24.

Refer to the Start Here booklet as a guide to connect your HP Digital Entertainment Center.

w

Read the important safety information before you install the HP Digital Entertainment Center. See “Safety Information” on page 17.

Required steps

1Unpack the box contents.

a Take inventory. See “Inventory” on page 29. Identify the items included with your HP Digital Entertainment Center.

b Identify equipment you will need that is not supplied.

c Place the HP Digital Entertainment Center where you can easily reach the back panel.

2Determine how you will connect the HP Digital Entertainment Center to your system.

3Connect the audio cables. See “Typical Audio Connection” on page 38.

a Audio In (optional)

b Audio Out (to TV, AV receiver, speakers) c Digital Audio Out

4Connect the Video Out to the TV or display. See “Typical Video Out Connections” on page 62.

Installation Overview 27

Page 33
Image 33
HP 2307890A manual Basic Setup, Setting Up the HP Digital Entertainment Center