HP 2307890A manual One Cable TV Box or Digital Cable Receiver Ntsc

One Cable TV Box or Digital Cable Receiver (NTSC)

Source In

Connect the NTSC TV signal source from the standard cable TV set-top box or digital cable receiver (sold separately) into the HP Digital Entertainment Center.

If you are using a standard set-top box or digital cable receiver with S-video or composite video output, do the following:

1Make sure that a coaxial cable connector from your cable TV source (wall) is plugged into the set-top box or digital cable receiver In connector.

2Connect a video cable:

aChoose a video out connector:

■ Coaxial (RF)

■ Video (composite)

■ S-video

bConnect the video cable from the set-top

box or digital cable receiver back panel Video Output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector.

3Connect stereo audio cables (skip this step if using coaxial [RF]):

a From the set-top box or digital cable receiver back panel Audio Out right (red) and Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors.

4Connect the set-top box Infrared Transmitter cable (required for signal). See “Infrared Transmitter Connection” on page 97.

Connecting TV

Connecting TV Source In 89