4.Slowly lower the display (1) until the webcam light (2) stops blinking and you hear a sound, which indicates that the webcam is now in focus.
The webcam captures the business card image and the webcam light turns off.
5.If you are capturing multiple business card images, remove the business card and insert another one. The webcam light turns on when the card is in focus. The webcam then captures the business card image and the webcam light turns off.
Repeat this step for additional business cards.
NOTE: Do not move or raise the display until you have finished capturing all of the business cards.
6.When you have finished capturing one or more business card images, remove the business card from the slot and raise the display.
7.If you have captured information from only one business card, review the data captured by HP Business Card Reader to be sure that it is complete.
– or –
If you have captured information from more than one business card image, close the Snap Cards and Recognize window, and then review the information captured by HP Business Card Reader to be sure that it is complete.
For more information on using HP Business Card Reader, refer to the software Help.
68 Chapter 5 Multimedia