Using HP 3D DriveGuard software

The HP 3D DriveGuard software enables you to perform the following tasks:

●Enable and disable HP 3D DriveGuard.

NOTE: Permission to enable or disable HP 3D DriveGuard is dependent on certain user privileges. Members of an Administrator group can change privileges for non-Administrator users.

●Determine whether a drive in the system is supported. To open the software and change settings, follow these steps:

1.In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window.

– or –

Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard.

NOTE: If prompted by User Account Control, click Yes.

2.Click the appropriate button to change settings.

3.Click OK.

Using HP 3D DriveGuard 87