To discharge a battery:

1.Unplug the computer from its external power source, but do not turn off the computer.

2.Run the computer on battery power until the battery is discharged. The battery light begins to blink when the battery has discharged to a low battery level. When the battery is discharged, the battery light turns off and the computer shuts down.

Step 4: Fully recharge the battery

To recharge the battery:

1.Plug the computer into external power and maintain external power until the battery is fully recharged. When the battery is recharged, the battery light on the computer turns off.

You can use the computer while the battery is recharging, but the battery will charge faster if the computer is off.

2.If the computer is off, turn it on when the battery is fully charged and the battery light has turned off.

Step 5: Reenable Hibernation and Sleep

CAUTION: Failure to reenable Hibernation after calibration may result in a full battery discharge and information loss if the computer reaches a critical battery level.

1.Click the battery meter icon in the notification area, and then click More power options.

– or –

Select Start > Control Panel > System and Security > Power Options.

2.Under the current power plan, click Change plan settings.

3.Reenter the settings that you recorded for the items in the On battery column.

– or –

Click Restore default settings for this plan, and then follow the on-screen instructions.

NOTE: If you restore default settings, omit steps 4 through 8.

4.Click Change advanced power settings.

5.Click the plus sign (+) next to Sleep, and then click the plus sign (+) next to Hibernate after.

6.Reenter the setting that you recorded for On battery.

7.Click OK.

8.Click Save changes.

Conserving battery power

●Select the Power saver power plan through Power Options under System and Security in the Windows Control Panel.

●Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them.

Using battery power 79