New V.250 Commands to Support V.92 AT Command Set
+PQC V.92 Phase 1 and Phase 2 Control
Added for V.92 support
Valid Parameter Syntax:
+PQC=<value>
+PQC?
+PQC=?
This command will control the enabling or disabling of the V.92 shortened Phase 1 and Phase 2 startup. This command is used in conjunction with the +PSS command. Changes to the value of either S109 or +PQC will affect the values of the other AT command.
Table A–10: Valid +PQC=<value> Values
Value | Description |
|
|
0 | Enable Short Phase 1 and Short Phase 2. |
|
|
1 | Enable Short Phase 1. |
|
|
2 | Enable Short Phase 2. |
|
|
3 | Disable Short Phase 1 and |
| Short Phase 2 (default). |
|
|
Lucent/Agere Command Set (Advanced Users Only) |
