AT Command Set
\K Break Control
Controls the response of the modem to a break received from the DTE or the remote modem or the \B command. The response is different in three separate cases.
The first case is where the modem receives a break from the DTE when the modem is operating in data transfer mode:
\K0 Enter online command mode, no break sent to remote modem.
\K1 Clear data buffers and send break to remote modem. \K2 Same as \K0.
\K3 Send break to remote modem immediately. \K4 Same as \K0.
\K5 Send break to remote modem in sequence with transmitted data (default).
The second case is where the modem is in the online command state (waiting for AT commands) during a data connection, and the \B is received in order to send a break to the remote modem:
\K0 Clear data buffers and send break to remote modem.
\K1 Clear data buffers and send break to remote modem. Same as \K0.
\K2 Send break to remote modem immediately.
\K3 Send break to remote modem immediately. Same as \K2.
\K4 Send break to remote modem in sequence with transmitted data.
\K5 Send break to remote modem in sequence with transmitted data. Same as \K4; default.
Lucent/Agere Command Set (Advanced Users Only) |