HP 3077WM, 3016US, 3017CL, 3015CA, 3005US manual At+Ms At+ Ms=, Minrate, Minrxrate, At+Ms ?, At+Ms =?

			V.25ter AT Command Set
V.25ter AT Commands (Continued)
Command	Subparameter	Values		Description
AT+MS	AT+ MS=			Once a
	<carrier>			modulation is
	<automode>			selected by the
				+MS command,
	<min_rate>
				the auto rate in
	<max_rate>
				both directions
	<min_rx_rate>			and the auto
	<max_rx_rate>			mode will be
				activated unless
				either parameter,
				<max rate> or
				<max rx rate> is
				specified by the
				same command.
				The settings of
				this command
				overwrite the
				settings of S28,
				S37, S38, S109.
				Likewise,
				changes to these
				registers ovewrite
				the settings of the
				+MS command.
AT+MS ?				Display the
				current status of
				the rate report
				result code.
AT+MS =?				Display the
				supported
				parameter values
				for DTE-DCE
				local rate
				reporting.

Lucent/Agere Command Set (Advanced Users Only) 4–15