Note | The camera uses a USB connection, so you do not |
| need to turn the computer off when connecting or |
| disconnecting the camera. |
|
|
To connect the camera to a Macintosh computer
1Make sure the camera is turned off.
2Plug the smaller end of the USB cable (supplied) into the camera.
3Plug the flat end of the cable into any USB port on your computer.
Note | When the camera is connected to your computer, | |
| only the | switch operates. The other |
| camera buttons do not respond. | |
Unloading images to a Macintosh computer
Unloading images is the process of copying images from the camera to your computer. If you have a CF memory card installed in the camera, images will be copied from the CF memory card to the computer.
You can unload images from your camera in one of two ways: automatically or by mounting the camera as a disk drive. The automatic unload procedure is the preferred method.
Tip | To conserve battery power, you can use an AC |
| power adapter (optional) when you are unloading |
| images to your computer. |
|
|
Sharing and printing images | 37 |