Chapter 3 – Related MultiVOIP Setup Parameters

 

 

 

 

 

 

 

 

 

Communication Manager Parameter Definitions Continued

 

 

 

 

 

 

 

 

 

Field Name

 

Values

 

Description

 

 

 

 

 

 

Q.931 Parameters

 

 

 

 

 

 

 

 

 

Use Fast Start

 

Y/N

 

Enables the H.323 Fast Start procedure. If “Register with

 

 

 

 

 

 

Communication Manager Gatekeeper” is enabled, this field defaults to

 

 

 

 

 

 

“N” and cannot be changed.

 

 

 

 

 

 

 

 

 

Call Signaling

 

port number

 

This value must be unique for each of the MultiVOIP’s FXS ports.

 

 

Port

 

 

 

This value must be the same for all of the MultiVOIP unit’s

 

 

 

 

 

 

FXO/DID ports that are managed by CM.

 

 

 

 

 

 

 

 

 

Delay Before

 

in milliseconds

 

Applicable to FXO ports only. It indicates the amount of delay that

 

 

Dial

 

 

 

will be introduced before a dialed sequence is sent.

 

 

 

 

 

 

 

 

 

 

 

 

GateKeeper RAS Parameters

 

 

 

 

 

 

 

 

 

Gatekeeper

 

alpha-numeric string

 

Optional. The name of the GateKeeper with which this MultiVOIP is

 

 

Name

 

 

 

trying to register.

 

 

Gateway

 

 

 

If “Register with Communication Manager Gatekeeper” is enabled, this

 

 

Prefix

 

 

 

field is not used. This number becomes registered with the

 

 

 

 

 

 

GateKeeper. Call requests sent to the gatekeeper and preceded by

 

 

 

 

 

 

this prefix will be routed to the VOIP gateway.

 

 

 

 

 

 

 

 

 

Gateway H.323

 

 

 

The H.323 ID is used to register FXO trunks with the MultiVOIP

 

 

ID

 

 

 

GateKeeper.

 

 

 

 

 

 

 

 

 

Phone

 

numeric

 

This phone number (PBX extension) must match the extension

 

 

Number/

 

 

 

configured on the Communication Manager “station” form (dialog

 

 

Extension

 

 

 

box). It is only relevant for the MultiVOIP’s FXS channels.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Security Code

 

alpha-numeric

 

This field value must match the security code configured on the

 

 

 

 

 

 

Communication Manager “station” form (dialog box). It is only

 

 

 

 

 

 

relevant for the MultiVOIP’s FXS channels.

 

 

 

 

 

 

 

 

 

 

 

Buttons

 

 

 

 

 

 

 

 

 

 

 

Default

 

 

 

Applies default values to all fields in the Communication Manager

 

 

 

 

 

 

Parameters screen.

 

 

 

 

 

 

 

 

 

Unregister

 

 

 

Allows you to unregister the registered station or trunk with respect

 

 

 

 

 

 

to the Communication Manager Gatekeeper. This command has an

 

 

 

 

 

 

immediate effect. This is a very useful diagnostic command.

 

 

Register

 

 

 

Allows you to register the unregistered station or trunk with respect

 

 

 

 

 

 

to the Communication Manager Gatekeeper. This command has an

 

 

 

 

 

 

immediate effect. This is a very useful diagnostic command.

 

 

 

Columns

 

 

 

 

 

 

 

 

 

 

 

GateKeeper IP

 

 

 

The IP address of the Communication Manager Gatekeeper.

 

 

Address

 

 

 

 

 

 

 

 

 

 

 

 

 

RAS Port

 

 

 

Typically this is 1719.

 

 

 

 

 

 

 

 

 

GateKeeper

 

 

 

This field must be left blank

 

 

Name

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rows

 

 

 

 

 

 

 

 

 

 

 

Primary

 

 

 

One PBX in the system must serve as the primary gatekeeper.

 

 

[gatekeeper]

 

 

 

 

 

 

Alternate GK 1

 

 

 

It is optional for the system to have a PBX that serves as a first

 

 

 

 

 

 

alternate gatekeeper.

 

 

Alternate GK 2

 

 

 

It is optional for the system to have a PBX that servers as a second

 

 

 

 

 

 

alternate gatekeeper.

 

34

Multi-Tech Systems, Inc. Avaya Communication Manager Guide