4Load the film with the matte dull side down in portrait orientation into the Printer
5When the Ready LED lights up press Reprint key.
The Ready LED begins to flash and the Printer takes several minutes to plot the calibration plot. The Printer ejects the sheet, and the Load Media LED lights up.
6Unload the sheet
7Wait until the ink on the sheet is dry
8Cut the sheet along the dotted line and reload the sheet facedown into the Printer in the direction indicated by the arrows on the calibration plot
The Ready LED begins to flash. The Printer takes less than 10 minutes to: read the calibration sheet; calculate the calibration data; save the data in the EEROM; and eject the sheet.
9Unload the sheet
12 Quick Reference Service Manual | HP DesignJet 430, 450C and 455CA Printers |
