Selecting properties of the equation writer (EQW)

First, press the H button to activate the CALCULATOR MODES input form. Within the CALCULATOR MODES input form, press the @@DISP@ soft menu key (D) to display the DISPLAY MODES input form. Press the down arrow key, ˜, three times, to get to the EQW (Equation Writer) line. This line shows two properties that can be modified. When these properties are selected (checked) the following effects are activated:

_Small

Changes font size to small while using the equation

_Small Stack Disp

editor

Shows small font in the stack after using the equation

 

editor

Detailed instructions on the use of the equation editor (EQW) are presented elsewhere in this manual.

For the example of the integral 0 eX dX , presented above, selecting the

_Small Stack Disp in the EQW line of the DISPLAY MODES input form produces the following display:

References

Additional references on the subjects covered in this Chapter can be found in Chapter 1 and Appendix C of the calculator’s user's guide.

Page 1-21