Table 2-12Solving Memory Problems (continued)

Insufficient memory error during operation.

Cause

Solution

 

 

Too many Terminate and Stay Resident programs (TSRs) are

Delete any TSRs that you do not need.

installed.

 

 

 

You have run out of memory for the application.

Check the memory requirements for the application or add

 

more memory to the computer.

 

 

Power LED flashes Red five times, once every second, followed by a two second pause, and the computer beeps five times. (Beeps stop after fifth iteration but LEDs continue flashing.)

Cause

Solution

 

 

Memory is installed incorrectly or is bad.

1.Reseat DIMMs. Power on the system.

2.Replace DIMMs one at a time to isolate the faulty module.

3.Replace third-party memory with HP memory.

4.Replace the system board.

ENWW

Solving Memory Problems 35