HP 620 Using the flash

Using the flash

When the camera is turned on, the flash is automatically set to Auto Flash. If you change the flash setting, the camera will remain in that setting until you change it again or turn off the

camera. By using the Flash button, you can move through the flash settings in the following order.

Icon	Setting	Description
	Auto Flash	The camera measures light and uses the
		flash if necessary.
	Red-eye	The camera measures light and uses the
	reduction	flash with red-eye reduction if necessary.
	Flash On	The camera always flashes. If the light is
		behind your subject, you can use the
		flash to increase the light on the front of
		your subject. This is also called “fill-
		flash.”
	Flash Off	The camera will not flash. Use this setting
		when you do not want a flash (such as
		with distant objects). This might result in
		long exposures that will require a tripod.

22 hp photosmart 620 user’s manual