Smart card reader
Description | Spare part number |
|
|
Smart card reader assembly | |
|
|
Before removing the smart card reader assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 42).
5.Remove the following components:
a.Bottom door (see Bottom door on page 49).
b.Hard drive (see Hard drive on page 54)
c.Optical drive (see Optical drive on page 50)
d.Fan (see Fan on page 64)
e.Heat sink (see Heat sink on page 65)
f.Keyboard (see Keyboard on page 68)
g.Bottom cover (see Bottom cover from top cover on page 71)
Remove the smart card reader assembly:
1.Position the computer
Component replacement procedures 93