01_LAYOUT_GB
CDRW INSTALLATIONI I
(CONT )
ENGLISH
5Locate the free end of the IDE data cable and thread it
out through the open drive bay. Do the same with the power cable and the (optional) audio cable (digital or
analogue). Your system will either be equipped with an analogue or digital soundcard connector. Use the appropriate connector on the drive recognisable with the amount of pins.
Power
Cable 
| Audio | Audio |
IDE | Cable | Cable |
Data Cable | (analogue) | (digital) |
|
|
6Connect your (optional) audio cable, IDE data cable and the power cable into the back of the CDRW 8x4x32. Make sure you correctly align pin 1 of the cable to pin 1 of the connectors.
1
1 | 1 | |
Power | ||
| ||
| cable |
Audio cable | IDE |
(Digital or | Data cable |
analogue) |
|
7